T2 TRIMMER PRODUCT SPECS
TWISTER T2 TRIMMER
| Input Voltage | 120V, 60Hz |
| Current Draw | 15.5A |
| Blade Motor | 1HP, 750 W, Fan Cooled, Stainless |
| Tumbler Motor | 1/30HP, 25W, Epoxy Coated, Watertight |
| Weight | 215 lbs / 97.5 kg |
| Shipping Weight (complete w/leaf collector) | 420 lbs / 190 kg |
| Cut Height | .040″ / 1/25 / 1mm |
| Length | 42.5in / 107.9cm |
| Width, with wheels | 27.5in / 69.9cm |
| Width, without wheels | 20.5in / 52.2cm |
| Height | 32.5in / 82cm |
| Circuit Breaker Required | 20A, 120V |
| Connector (Plug) | NEMA 5-20P |
| Height without wheels | 30.5in / 76cm |
| Discharge | 6″ / 152mm |
TWISTER T2 LEAF COLLECTOR
| Input Voltage | 230V |
| Motor | 2HP, UL & CSA Approved, Fan Cooled |
| Amps (running) | 9 |
| Amps (startup) | 45A |
| Motor Speed | 3450 RPM |
| Airflow Capacity | 1700 CFM |
| Static Pressure | 10.5in of H20 |
| Impeller | 12″ / 305mm, Balanced Aluminum |
| Inlet (cyclone) | 6″ / 153mm |
| Height | 36in / 91.5cm |
| Weight | 123lbs / 56kg |
| Circuit Breaker Required | 15A / 240V |
| Connector (plug) | NEMA 6-15P |
| Sound Rating | 80 db |
| Fused | Yes |
| Collection Bag | 3 – 6 Mil |
| Generator Requirement | 10,000W |
| Maintenance | Clean impeller housing frequently. Replace filter bag. |
| Extension Cord Gauge | 12AWG MINIMUM Extension Cord Length: 25′ / 7.6m MAXIMUM *** Failure to meet these min. requirements can cause damage |
T2 THROUGHPUT SPECS
Twister’s proprietary single piece flow design allows for continuous run time with no interruptions or downtime. Add conveyors to perform ongoing quality control throughout your trimming process. Run in configurations up to 3 in a row, for a total production speed of up to 120 lbs/hr! Start with one, add a second, and when you’re ready slide in the third. No additional labor required!
| T2's | Type | Feed lbs/hr (up to) |
Feed kgs/hr (up to) |
| 1 | Wet | 35 | 16 |
| 2 | Wet | 78 | 36 |
| 3 | Wet | 124 | 56 |
| 1 | Dry | 11 | 5 |
| 2 | Dry | 25 | 12 |
Note* when purchasing a T2 system you will not need a hopper, when purchasing an individual T2 without the feed conveyor you will need to add a hopper
MANUALS
Manual
EnglishSpanish
German
French
Portuguese
Vietnamese
Accessories Manual
T2 Triple RailsT2 Hopper Installation
T2 Trim Saver (NA)
T2 Trim Saver (EURO)
Cut Sheet
NA – EnglishEU – English
Spanish
SA – Spanish
German
Italian
Portuguese
Albanian
Brochure
English
CONNECTOR (PLUG)
NA Model (T2 Trimmer)
NEMA 5-20P
EU Model (T2 Trimmer)
CEE 7/7
NA Model (T2 Leaf Collector)
NEMA 6-15P
EDUCATION VIDEOS
PRODUCT VIDEOS
SUPPORT VIDEOS
